Gas Detector Ventis MX4 Pump

Gas Detector Ventis MX4 Pump

VTS-K1232110211: Ventis MX4- LEL (Pentane), CO, H2S, O2, Li-ion, Desktop Charger, Black, With pump, Soft Case ATEX/EICEx

The Gas Detector Ventis MX4 multi-gas monitor will detect from one to four gases with a wide range of sensor options to ensure safety in a variety of environments. The Ventis can be configured with a powerful and lightweight motorized sampling pump for easy monitoring in confined spaces, or the instrument can be used without the pump for continuous personal monitoring Gas Detector.

Specification:

Case Material:
• Polycarbonate with Protective Rubber Overmold

Instrument Colors:
• Black
• Safety Orange

Dimensions:
• 103 mm x 58 mm x 30 mm (4.1” x 2.3” x 1.2”) – Ventis, Lithium-ion Battery Version (typical)
• 172 mm x 67 mm x 66 mm (6.8” x 2.6” x 2.6”) – Ventis with Pump, Lithium-ion Battery Version (typical)

Weight:
• 182 g (6.4 oz) – Ventis, Lithium-ion Battery Version (typical)
• 380 g (13.4 oz) – Ventis with Pump, Lithium-ion Battery Version (typical)

Operating Temperature Range:
• -20°C- 50°C (-4°F-122°F) typical

Operating Humidity Range:
• 15%-95% non-condensing (continuous) typical

Display/Readout:
• Backlit Liquid Crystal Display (LCD)
• Numbers and universal icons make the user interface simple and easy to understand

Integral Pump Option:
• The Ventis can be configured with or without an integral motorized sampling pump
• Optional integral motorized sampling pump is capable of drawing samples from up to 100 feet

Slide-on Pump Option:
• The Ventis is designed for use with the self-powered motorized Ventis Slide-on Pump, Model VSP
• Ventis monitor can be attached and removed from the Ventis Slide-on Pump without the use of tools
• Optional slide-on motorized sampling pump is capable of drawing samples from up to 50 feet

Sensors:
• Combustible gases/methane – Catalytic Diffusion
• O2, CO, H2S, NO2, SO2 – Electrochemical
• Field replaceable/interchangeable smart sensor modules
• The Ventis can be configured to gas detector monitor from one to four gases including oxygen, combustible gas/CH4 and a choice of any two of the following toxic gases: CO, H2S, NO2, SO2

Measuring Ranges:
• Combustible Gases: 0-100% LEL in 1% increments
• Methane (CH4): 0-5% of vol. in 0.01% increments
• Oxygen (O2): 0-30% of vol. in 0.1% increments
• Carbon Monoxide (CO): 0-1,000 ppm in 1 ppm increments
• Hydrogen Sulfide (H2S): 0-500 ppm in 0.1 ppm increments
• Nitrogen Dioxide (NO2): 0-150 ppm in 0.1 ppm increments
• Sulfur Dioxide (SO2): 0-150 ppm in 0.1 ppm increments

Warranty:
• Industrial Scientific Corporation’s Ventis MX4 portable gas monitors are warranted to be free from defects in material and workmanship for a period of two years after purchase. This warranty includes the sensors, the pump, and the lithium-ion battery pack as shipped with the Ventis MX4.

Made in USA
Two Button Operations:
• Allows the user to easily configure the instrument

STEL and TWA Readings and Alarms:
• Short-term and time-weighted average exposure measurements and alarms allow users to potentially set instantaneous alarms at higher levels, allowing work to continue safely while still providing alarms in conditions of prolonged exposure at lower gas concentrations

Data Logging:
• On-board continuous datalogging memory is capable of storing a minimum of three months of data for the four-sensor configuration at the fixed 10 second interval

Alarm Event Log:
• On-board event-logger will record the last sixty alarm events in its memory. Information stored for each event will be: sensor type and serial number, peak exposure level, alarm duration, alarm date and time, alarm thresholds, and sensor measurement units.

Peak/Hold Function:
• Provides quick access to an on-screen review of the highest gas readings the sensors have been exposed to since the last time the peak readings were cleared (lowest for O2) without the need to download datalogged information

Quick-Cal Function:
• When enabled, this mode saves time and money by allowing all sensors to be calibrated simultaneously using one cylinder of blended calibration gas

Confidence Indicator:
• When enabled, the confidence indicator will emit a signal every 90 seconds in gas monitoring mode, to inform the user that the unit is operational

Programmable Bump Test Mode:
• Prompts user to bump test the instrument on a regular basis and provides an alarm that prevents normal use if bump test has not been performed at the desired interval. When enabled, the monitor will sound two beeps every 30 seconds and its display icons will indicate a bump test is due.

Calibration Overdue Alarm:
• Prompts user and prevents normal use if instrument has not been calibrated within the user prescribed timeframe

V•Cal Calibration Station™ compatible:
• Provides automatic calibration and bump testing with stand-alone operation and no PC requirement

Certifications:

• UL: Class I, Division 1, Groups A B C D, T4; Zone 0, AEx ia IIC T4
• Class II, Groups F G (Carbonaceous & Grain dust);
• IP66; IP67
• ATEX: Ex ia IIC T4 Ga and Ex ia I Ma;
• Equipment Group and Category II 1G and I M1; IP66; IP67
• IECEx: Ex ia IIC T4 Ga; IP66; IP67
• CSA: Class I, Division 1, Groups A B C D, T4; Ex d ia IIC T4
• C22.2 No. 152 for %LEL reading only
• ANZEx: Ex ia s Zone 0 I/IIC T4; IP66; IP67
• INMETRO: Ex d ia IIC T4 Gb; IP66; IP67
• KOSHA: Ex d ia IIC T4
• MSHA: 30 CFR Part 22; Permissible for underground mines; Li-ion versions only
• PA-DEP: Permissible for PA Bituminous Underground Mines
• China EX: Ex ia d IIC T4 Gb
• China CMC: Metrology approval
• China MA: Approved for underground mines; diffusion (without pump) standard Li-ion version only
• GOST-K: PBExdiaI X / 1ExdiaIICT4 X
• GOST-R: PBExdiaI X / 1ExdiaIICT4 X

Mau cek lebih lanjut bisa di klik di bawah sini :